Industrial Assemblage For Your Tabletop or Bookshelf

2014-05-18 23.16.17

Metal Art With Textured Finish

I just completed this tabletop sculpture from miscellaneous scraps of steel I had lying around.  This is an industrial steampunk  sculpture made from a plate from a discarded garage door opener, a piece of square tubing,  hexagonal rod, and a remnant piece of channel from another project.  This was all arc welded together to form a handsome and bold sculpture.

2014-05-18 23.16.082014-05-18 23.15.55

Arc Welded Industrial Assemblag

This first photo on the left is a closeup of the body of the sculpture.  The square tube is offset to the left to alloy the circular hole to be viewed unabstructed.  A hex bar scrap that was bent was added as an angular accent to bring balance to the composition.  On the right photo you can see the hex bar staff extending several inches above the plate.  This brings the total work to a height of 19 inches.  The sculpture is 6 inches wide at the widest point.  The piece of channel that is the base is approximately 3 inches by 4 inches.  For this sculpture and more, be sure to check out my Etsy shop!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s